Container Master
UNIMOD
2,4x2 m Single Container
Lumi
It is a container containing one door in the short direction. It helps in creating productive areas with its superior insulation properties.
Box
It is a container with two roomy sides in the short direction, a door and a window wall in the long direction. It is designed to meet your needs to use light effectively and display the inside of the container.
Perfect Design
L:238 cm W:200 cm W:250 cm
Unimod Container is a unit container. It can be enlarged by adding new ones in both directions at any time.
The unit is designed with a wall system. Each wall can be pinned wherever desired.
It offers perfect sealing and perfect joints.
Easy Assembly and Disassembly
Easy setup. Easy disassembly. Thoughtful details.
It can be installed without equipment with 4 people in difficult conditions where forklifts and cranes cannot enter.
It's not one-time. Possibility of assembly and disassembly multiple times.
x34
One trip by road 34 pieces Unimod Box Container can be transported.
x29
with 40HC at once 28 pieces Unimod Box Container can be transported. It is also possible to carry it with 40 and 20 DC.
Economical and Easy Logistics
Design that can fit into trucks, 20' and 40' cargo containers. Only a forklift is sufficient for loading, unloading and installation.
Designed by taking into account the exponentially smaller dimensions and the capacities of standard transportation vehicles, Unimod Container stands out with its logistics feature.
For the first time in the world, B2KON provides high fuel savings and efficiency by sending 34 flat pack containers measuring 2.38x2 m at a time by road and 28 flat pack containers by sea. Thus, it contributes to maintaining the balance of nature with low CO2 emissions.
Everything Ready All Easy
All in one point and demountable electrical installation. With the plug inserted into the electrical box, the entire installation becomes ready. It is both economical and practical with the possibility of installation and disassembly that does not require expertise.
Ready and Safe Electrical Installation
Technicial Specifications
FRAME
Craneless Assembly Frame
Frame with weldless bolted connection, which can be assembled by 4 people without a crane and is suitable for disassembly.
Galvanized Coated Frame
Galvanized coating on the frame provides high level of resistance against rust.
Electrostatic Powder Coating
RAL 7016 Anthracite gray electrostatic powder coated impact and scratch resistant frame.
100kg/m2
Snow Load
Frame that meets the L/200 deformation requirement according to Eurocode 3.
UPPER MODULE
Electricity with Overcurrent Protection
Ready-to-use electrical installation with grounding installed and LED lighting.
50 mm Mineral Wool Insulation
R: 1.35 m2K/W Fire resistant heat and sound insulation.
White PVC Wainscoting Ceiling
Roof with galvanized roofing sheet coating. Ceiling with white PVC paneling.
BOTTOM MODULE
Felt Vinyl Flooring
PVC floor covering with a parquet look and a felt backing.
18 mm OSB-2 Floor Panel
18 mm thick moisture resistant OSB-2 Floor covering.
200kg/m2
Capacity
Bearing capacity that meets the L/250 deformation requirement according to Eurocode 3.
WALLS
40mm EPS
Insulation
R:1.14 m2K/W 20 kg/m3 density 40 mm thick EPS insulated sandwich panel wall.
Electrostatic Painted Locking Steel Door
Locked steel door machined from galvanized sheet metal, electrostatic powder coated, with the same insulation as the walls.
Double Glass Insulated Window
4+12+4 Thermal insulated double glazed, white colored, single wing PVC window.